Firmware for X-Pro2, X-T2, X100F and X-T20

firmware updates will add new support for the FUJIFILM X RAW STUDIO software which allows the user to connect the camera to a computer via USB cable for developing raw files in camera (X-Pro2, X-T2, X100F). The new firmware will also improve third party studio flash controller usability (X-Pro2, X-T2, X100F) and will dramatically improve the AF-C tracking algorithm in zone and tracking AF mode (X-Pro2, X-T2). It will add 4K video support, a computer tethering function (X-Pro2) and enhance the touch panel operation when using the EVF (X-T20).

 

FUJIFILM X-Pro2: Ver.4.00 – Key Features

1. Addition of 4k video mode

The update adds 4k video using the X Series famous Film Simulation modes.  You can input audio from an external microphone (Excluding HDMI output for recording).

2. Support for tether shooting via USB or Wi-Fi

After connecting a camera to a computer, the compatible software (*1) will enable users to transfer images taken with the camera to the computer and save them in a specified folder, or to control the camera from the computer.

3. New AF tracking algorithm for moving subject

Thanks to the newly developed image recognition algorithm, the update enhances AF-C to track moving subjects twice as fast as previous firmware(*2). In addition, the update also enhances tracking to be able to capture up to 50% smaller moving subjects than before.

4. Support “FUJIFILM X RAW STUDIO”

Once connecting a camera to a computer via USB cable, the “FUJIFILM X RAW STUDIO” enables users to convert RAW files with X Processor Pro. The first batch processing will also be available. The “FUJIFILM X RAW STUDIO” can be downloaded from the FUJIFILM website for free.

5. Improve radio flash controller usability

The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers.

6. Support for backup/restore of camera settings via FUJIFILM X Acquire

Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available.

*1 Software listed below is required.

FUJIFILM X Acquire

http://fujifilm-x.com/x-stories/fujifilm-x-acquire-features-users-guide/

Tether Shooting Plug-in PRO / Tether Shooting Plug-in (*Adobe® Photoshop® Lightroom® 6 or CC is required.)

https://exchange.adobe.com/addons/products/16759

https://exchange.adobe.com/addons/products/16991

https://exchange.adobe.com/addons/products/12041

https://exchange.adobe.com/addons/products/12039

HS-V5

http://www.fujifilm.com/news/n141120_04.html

*2 FUJIFILM X Series digital camera models with X-TransTM CMOS III sensor and X-Processor Pro as of September, 2017.

FUJIFILM X-T2: Ver.3.00 – Key Features

1. New AF tracking algorithm for moving subject

Thanks to the newly developed image recognition algorithm, the update enhances AF-C to track moving subjects twice as fast as previous firmware. In addition, the update also enhances tracking to be able to capture up to 50% smaller moving subjects than before.

2. Support “FUJIFILM X RAW STUDIO”

Once connecting a camera to a computer via USB cable, the “FUJIFILM X RAW STUDIO” enables users to convert RAW files with X Processor Pro. The fast batch processing will also be available. The “FUJIFILM X RAW STUDIO” can be downloaded from the FUJIFILM website for free.

3. Improve radio flash controller usability

The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers.

4. Support for backup/restore of camera settings via FUJIFILM X Acquire

Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available.

 

FUJIFILM X100F: Ver.2.00 – Key Features

1. Support for backup/restore of camera settings via FUJIFILM X Acquire

Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available.

2. Supports “FUJIFILM X RAW STUDIO”

Once connecting a camera to a computer via USB cable, the “FUJIFILM X RAW STUDIO” enables users to convert RAW files with X Processor Pro. The first batch processing is also available. The “FUJIFILM X RAW STUDIO” can be downloaded from the FUJIFILM website for free.

3. Improve radio flash controller usability

The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers.

 

FUJIFILM X-T20: Ver.1.10 – Key Features

1. Touch panel operation when using the EVF

The firmware update will make it possible to use the touch panel while looking into the viewfinder. According to the operation method, it’s possible to set the effective range of the touch panel to the full screen, right half, left half, or OFF.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

You May Also Like

Leave a Reply

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close